---
title: "Likelihood Free Markhov Chain Monte Carlo (LFMCMC)"
author:
  - Andrew Pulsipher
date: "`r Sys.Date()`"
vignette: >
  %\VignetteIndexEntry{Likelihood Free Markhov Chain Monte Carlo (LFMCMC)}
  %\VignetteEngine{quarto::html}
  %\VignetteEncoding{UTF-8}
---

# Introduction

The purpose of the "LFMCMC" class in epiworldR is to perform a Likelihood-Free Markhov Chain Monte Carlo (LFMCMC) simulation. LFMCMC is used to approximate models where the likelihood function is either unavailable or computationally expensive. This example assumes a general understanding of LFMCMC.
To learn more about it, see the Handbook of Markhov Chain Monte Carlo by Brooks et al. <https://doi.org/10.1201/b10905>.

In this example, we use LFMCMC to recover the parameters of an SIR model.

# Setup The SIR Model

Our SIR model will have the following characteristics:

* **Virus Name:** COVID-19
* **Initial Virus Prevalence:** 0.01
* **Recovery Rate:** 1/7 (0.14)
* **Transmission Rate:** 0.02
* **Number of Agents:** 2,000

We use the `ModelSIR` and `agents_smallworld` functions to construct the model in epiworldR.

```{r}
#| label: setup-sir
library(epiworldR)

model_seed <- 122

model_sir <- ModelSIR(
  name = "COVID-19",
  prevalence = .01,
  transmission_rate = .02,
  recovery_rate = 1 / 7
)

agents_smallworld(
  model_sir,
  n = 2000,
  k = 10,
  d = FALSE,
  p = 0.01
)
```

Then we run the model for 50 days and print the results.

```{r}
#| label: run-sir
verbose_off(model_sir)

run(
  model_sir,
  ndays = 50,
  seed = model_seed
)

summary(model_sir)
```

Note the "Model parameters" and the "Distribution of the population at time 50" from the above output. Our goal is to recover the model parameters (Recovery and Transmission rates) through LFMCMC. We accomplish this by comparing the population distribution from each simulation run to the "observed" distribution from our model. We get this distribution using the `get_today_total` function in epiworldR.

```{r}
#| label: get-sir-model-data
model_sir_data <- get_today_total(model_sir)
```

For practical cases, you would use observed data, instead of a model simulation. We use a simulation in our example to show the accuracy of LFMCMC in recovering the model parameters. Whenever we use the term "observed data" below, we are referring to the model distribution (`model_sir_data`).

# Setup LFMCMC

In epiworldR, LFMCMC requires four functions:

The **simulation function** runs a model with a given set of parameters and produces output that matches the structure of our observed data. For our example, we set the Recovery and Transmission rate parameters, run an SIR model for 50 days, and return the distribution of the population at the end of the run.

```{r}
#| label: simfun
simulation_fun <- function(params, lfmcmc_obj) {

  set_param(model_sir, "Recovery rate", params[1])
  set_param(model_sir, "Transmission rate", params[2])

  run(
    model_sir,
    ndays = 50
  )

  get_today_total(model_sir)

}
```

The **summary function** extracts summary statistics from the given data.
This should produce the same output format for both the observed data and the simulated data from `simulation_fun`. For our example, since the population distribution is already a summary of the data, our summary function simply passes that data through. With more complicated use cases, you might instead compute summary statistics such as the mean or standard deviation.

```{r}
#| label: sumfun
summary_fun <- function(data, lfmcmc_obj) {
  return(data)
}
```

The **proposal function** returns a new set of parameters, which it is "proposing" parameters for the LFMCMC algorithm to try in the simulation function. In our example, it takes the parameters from the previous run (`old_params`) and does a random step away from those values.

```{r}
#| label: propfun
proposal_fun <- function(old_params, lfmcmc_obj) {
  res <- plogis(qlogis(old_params) + rnorm(length(old_params), sd = .1))
  return(res)
}
```

The **kernel function** effectively scores the results of the latest simulation run against the observed data, by comparing the summary statistics from `summary_fun` for each. LFMCMC uses the kernel score and the Hastings Ratio to determine whether or not to accept the parameters for that run. In our example, since `summary_fun` simply passes the data through, `simulated_stats` and `observed_stats` are our simulated and observed data respectively.

```{r}
#| label: kernfun
kernel_fun <- function(
  simulated_stats, observed_stats, epsilon, lfmcmc_obj
) {

  diff <- ((simulated_stats - observed_stats)^2)^epsilon
  dnorm(sqrt(sum(diff)))

}
```

With all four functions defined, we can initialize the simulation object using the `LFMCMC` function in epiworldR along with the appropriate setter functions.

```{r}
#| label: lfmcmc-setup
lfmcmc_model <- LFMCMC(model_sir) |>
  set_simulation_fun(simulation_fun) |>
  set_summary_fun(summary_fun) |>
  set_proposal_fun(proposal_fun) |>
  set_kernel_fun(kernel_fun) |>
  set_observed_data(model_sir_data)
```

# Run LFMCMC Simulation

To run LFMCMC, we need to set the initial model parameters. For our example, we use an initial Recovery rate of 0.3 and an initial Transmission rate of 0.3. We set the kernel epsilon to 1.0 and run the simulation for 2,000 samples (iterations) using the `run_lfmcmc` function.

```{r}
#| label: lfmcmc-run
initial_params <- c(0.3, 0.3)
epsilon <- 1.0
n_samples <- 2000

# Run the LFMCMC simulation
run_lfmcmc(
  lfmcmc = lfmcmc_model,
  params_init = initial_params,
  n_samples = n_samples,
  epsilon = epsilon,
  seed = model_seed
)
```

# Results
To make the printed results easier to read, we use the `set_params_names` and `set_stats_names` functions before calling `print`. We also use a burn-in period of 1,500 samples.

```{r}
#| label: lfmcmc-print
set_params_names(lfmcmc_model, c("Recovery rate", "Transmission rate"))
set_stats_names(lfmcmc_model, get_states(model_sir))

print(lfmcmc_model, burnin = 1500)
```

We can also look at the trace of the parameters:

```{r}
#| label: post-dist
# Extracting the accepted parameters
accepted <- get_all_accepted_params(lfmcmc_model)

# Plotting the trace
plot(
  accepted[, 1], type = "l", ylim = c(0, 1),
  main = "Trace of the parameters",
  lwd = 2,
  col = "tomato",
  xlab = "Step",
  ylab = "Parameter value"
)

lines(accepted[, 2], type = "l", lwd = 2, col = "steelblue")

legend(
  "topright",
  bty = "n",
  legend = c("Recovery rate", "Transmission rate"),
  pch    = 20,
  col    = c("tomato", "steelblue")
)
```

Recall that the observed data came from a model with a Recovery rate of 0.3 and a Transmission rate of 0.3. As the above output shows, LFMCMC made a close approximation of the parameters, which resulted in a close approximation of the observed population distribution. This example highlights the effectiveness of using LFMCMC for highly complex models.
