GNU/Linux Desktop Survival Guide
by Graham Williams
|
|
GNU/Linux Desktop Survival Guide by Graham Williams |
|
|||
Debian Packages: iptables.
Consider a home network of GNU/Linux and MSWindows machines, connected via ethernet. A GNU/Linux machine can connect to the Internet via PPP. We want to provide network access from all machines. We use iptables (for kernel version 2.4).
Suppose Modern (97.8) is the host which will connect to the Internet using PPP. After installing iptables do the following on this host which will serve as the Internet gateway:
# iptables --flush # iptables --table nat --flush # iptables --delete-chain # iptables --table nat --delete-chain # iptables --table nat --append POSTROUTING --out-interface ppp0 -j MASQUERADE # iptables --append FORWARD --in-interface eth0 -j ACCEPT |
This clears the rules for filtering and then adds a rule to provide the IP forwarding. Now we need to turn it on for the kernel:
# echo 1 > /proc/sys/net/ipv4/ip_forward |
And that's it! This host, Modern (97.8) will now act as a gateway to the Internet for your local machines.
There is some setup needed to have this survive a reboot. One approach is to do this through init.d, as explained in Section 46.2. The first step is to create a script file called /etc/init.d/myfirewall containing:
#! /bin/sh
#
# Set up a firewall for IP Masquerading
#
PATH=/bin:/usr/bin:/sbin:/usr/sbin
case "$1" in
start)
echo -n "Starting IP Masquerading: myfirewall"
iptables --flush
iptables --table nat --flush
iptables --delete-chain
iptables --table nat --delete-chain
iptables --table nat --append POSTROUTING --out-interface ppp0 -j MASQUERADE
iptables --append FORWARD --in-interface eth0 -j ACCEPT
echo 1 > /proc/sys/net/ipv4/ip_forward
echo "."
;;
stop)
echo -n "Stopping IP Masquerading: myfirewall"
echo 0 > /proc/sys/net/ipv4/ip_forward
echo "."
;;
reload)
echo "Not implemented."
;;
force-reload|restart)
sh $0 stop
sh $0 start
;;
*)
echo "Usage: /etc/init.d/myfirewall {start|stop|restart|force-reload|reload}"
exit 1
;;
esac
exit 0
|
Then the firewall can be turned on and off with:
$ wajig start myfirewall $ wajig stop myfirewall |
To have it started at boot and stopped at shutdown:
# update-rc.d myfirewall start 40 S . stop 89 0 6 . |
This creates the following links:
/etc/rc0.d/K89myfirewall -> ../init.d/myfirewall /etc/rc6.d/K89myfirewall -> ../init.d/myfirewall /etc/rcS.d/S40myfirewall -> ../init.d/myfirewall |
Another approach is to only turn it on and off as a PPP connection is established. See the scripts in /usr/share/doc/iptables/examples for details.
Now Rose (97.30) and Inco (97.25), machines on the local home network, can have their network interface set up:
iface eth0 inet static
address 192.168.1.2
network 192.168.1.0
netmask 255.255.255.0
gateway 192.168.1.5 (modern)
|
